***5.11 item 41180 Utility Polo in RED is back ordered until Spring '24..please call for options***

United Shield International

United Shield International Complete Active Shooter Kit - OSFM Police Level III+

Write a Review
United Shield International PAGST / PSTSC650 Helmet, Acer Lite Gen II Plate, and RPSS Carrier
Bulk Pricing:
Buy in bulk and save

Active Shooter One Size Fits Most Protection Kit Level AcerLite III+


Facing an active shooter scenario is already a stressful and dangerous situation; no matter what type of first response unit you are a part of. Mitigate the stress and danger - keep yourself and members of your department safe in an active shooter situation with these pre-built active shooter kits from United Shield International and East Coast Emergency Outfitter. Looking to purchase for the whole department? Reach out to with your department's information.

The AcerLite Level III+ active shooter kit includes the following items 

One (1) United Shield International Advanced Rifle Plate Suspension System - RPSS:

  • Front & back plate pockets that accept 10" x 12" plates with bottom loading for quick removal
  • Adjustable / detachable padded shoulder straps
  • Adjustable nylon side straps with quick release buckles
  • 1000 denier nylon
  • Front & back MOLLE webbing grid
  • Emergency drag strap
  • Lightly padded mesh on inner surface allows for comfort and air flow
  • Available in OD Green, Tan, and Black
  • One Size Fits Most

Two (2) United Shield International Acer Lite Gen II Plates:

  • NIJ 0101.06 Certified Level III Stand Alone Plate
  • Ergonomically designed for maximum comfort and safety
  • 6.3 lbs
  • 10" x 12", 6" x 8" & 6"x6"
  • Defends against:
    • 7.62 x 51mm Nato Ball
    • 7.62 x 39mm AK47 MS Core
    • 5.56 x 45mm 62 gr M855 & SS109
  • Standard plates come black steel with a polyurea wrap

One (1) United Shield International PAGST Helmet w/ USI BOA® Retention:

  • Suitable for military and police tactical use
  • Para aramid construction provides lightweight, robust protection
  • Includes United Shield International BOA® retention harness for quick adjustments
    • Large size fits most with United Shield's BOA® system (size chart below)
  • Defends against fragments from:
    • V50 450m/s - V50 700m/s according to STANAG 2920 & US MIL STD 662F
    • Exceeds US Military V50 fragmentation requirement for the ACH helmet
  • Available in OD Green, Tan, and Black
  • Available in Small, Medium, Large, & X-Large

One (1) PPE Active Shooter Bag(CSB815):

  • Durable heavyweight nylon
  • Full length zipper
  • Sturdy carry handle
  • Detachable shoulder strap
  • Available in Black
  • Bag may differ from picture

One (1) 3" x 6" custom velcro tag:

  • Custom heat-transfer nametag with your choice of Black, White, Yellow, or Reflective Silver Lettering
  • Custom tags come with hook velcro sewn to back
  • For best look and fit, keep wording to a minimum
  • Custom tags available in Black, Tan, and OD Green

One (1) Single Buckle Radio Pouch : 

  • Holds most personal radios
  • Adjustable height buckle flap closure
  • Bungee retention option included
  • Drainage hole
  • 2x tuck strap MOLLE attachment
  • 5"H x 3.5"W x 1.5"D

One (1) Medical Trauma Pouch :   

  • Slides on to 4" elastic cummerbund or internal belly band
  • Fully opening ambidextrous zipper
  • 2"x2" ID panel on front
  • Elastic retention for internal items
  • 5"H x 3"W x 1.5"D

One (1) Single Rifle Mag Pouch : 

  • Holds one (1) rifle magazine
  • Holds any rifle mag from 5.56 to 7.62 or .308
  • Adjustable height and removable flap closure
  • Bungee mag retention included
  • 2x MOLLE tuck strap attachement
  • Rubberized liner
  • Drainage hole
  • Elastic mag retention
  • 6"H x 3.25"W x 1.125"D 

One (1) Stacked Handcuff Pouch : 

  • Holds 2 hand cuffs
  • Elastic retention for single cuff
  • Hook & loop flap closure
  • 2x MOLLE tuck strap attachement
  • 3.5"H x 3.25"W x 1.875"D 

United Shield PAGST / PSTSC650 Helmet Size Chart:

SIZE Head Sizes (centimeters) Circumference (inches) Diameter (inches)
SMALL 50 - 56 19 - 22 5.5 - 6.5
MEDIUM 54 - 59 21 - 23 6.5 - 7.5
LARGE 57 - 64 22 - 25 7 - 8
X-LARGE 61 - 66 24 - 26 7.5 - 8.5



  • RPSS Carrier is one size fits most
  • Bulk orders of 25+ kits receive 10% off each kit
  • Please allow 2-3 weeks delivery time for completed kits to arrive

Additional Information:

United Shield International Advanced Rifle Plate Suspension System - Data Sheet

United Shield International PAGST Helmet w/ USI BOA® Retention - Data Sheet

United Shield International Acer Lite Gen II Plates - Data Sheet


This UNITED SHIELD INTERNATIONAL (USI) body armor vest consists of two principle components--the BALLISTIC PANELS, which consists of ballistic resistant materials enclosed within a non-removable cover, and the CARRIER, a removable fabric garment (the CARRIER merely carries or holds the BALLISTIC PANELS and provides no ballistic protection). NATIONAL INSTITUTE OF JUSTICE BODY ARMOR CLASSIFICATION This vest model was designed to stop the specific threats which are used in the test protocol for a National Institute of Justice (NIJ) body armor classification standard. This vest model has complied with the requirements of the applicable NIJ body armor classification standard for a new vest. The NIJ classification standard which is applicable to your vest is listed on a label located on the front of the BALLISTIC PANELS. Please note that protection is limited to those bullets and impacts as described in the NIJ Standard-0101.06. LIMITED WARRANTY Subject to the LIMITATIONS described below, this vest is warranted to be free of defects in materials and workmanship for the applicable warranty period. The warranty period for the CARRIER is 12 months from the date of purchase. The warranty period for the BALLISTIC PANELS is 5 years from the date of purchase. This warranty is subject to the laws of the State of Michigan. LIMITATIONS By ordering and accepting a USI body armor vest and related equipment, the Purchaser acknowledges and agrees that the selection of the specific vest or product configuration (shape and size) and the determination of appropriate and adequate ballistic threat level capabilities (degrees of ballistic protection of the specific model) were made solely by the Purchaser and NOT by USI. The Purchaser further acknowledges that its decisions concerning vest configuration and threat level capabilities were made with reference to anticipated threats and perils, the nature and extent of which were known only to the Purchaser and not to USI. Our warranties extend to the original user-purchaser only and do not include any claim or warranty made by a dealer or anyone else beyond the provisions of this warranty. This warranty is voided if the maintenance or care as stated on the BALLISTIC PANELS label and enclosed instructions have not been followed or if the product has been altered in any manner by anyone other than USI. Since a coordinated BALLISTIC PANELS and CARRIER are essential for proper protection, use of a CARRIER not produced or approved by USI nullifies the warranty. This body armor cannot protect areas of your body which it does not cover. DISCLAIMERS THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE EXPRESSLY DISCLAIMED. THE PURCHASER AGREES THAT ITS SOLE AND EXCLUSIVE REMEDY AGAINST USI WILL BE LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS, PROVIDED THAT THE PURCHASER COMPLIES WITH ALL INSTRUCTIONS AND DIRECTIONS REGARDING THE VEST OR ITS COMPONENTS. NO PARTIAL OR FULL REFUND TO THE PURCHASE PRICE WILL BE PROVIDED. THIS EXCLUSIVE REMEDY WILL NOT BE DEEMED TO HAVE FAILED OF ITS ESSENTIAL PURPOSE SO LONG AS USI IS WILLING TO REPAIR OR REPLACE A DEFECTIVE PART IN ANY MANNER WHICH ALLOWS THE PRODUCT TO BE WORN AND MEET THE PERFORMANCE CRITERIA FOR THE BALANCE OF WARRANTY PERIOD. USI WILL NOT BE LIABLE TO PURCHASER AND DISCLAIMS ANY LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY ANY APPLICABLE STATE LAW FOR A BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. WARNINGS BALLISTIC PANELS insertion--always insert the BALLISTIC PANELS as described in enclosed materials. There is a specific STRIKE FACE which is the side of the BALLISTIC PANELS which should be a way from your body and facing outwards toward any possible threat. CARE--proper care of the BALLISTIC PANELS and CARRIER are crucial to maximizing the comfort and performance of your vest. Always follow the instructions for care and maintenance which are enclosed. Always store your armor at normal room temperatures - never in extreme hot or cold temperatures. UNITED SHIELD INTERNATIONAL Traverse City, Michigan 49684 United States of America